background image

ENGLISH

been tested and found to comply with the 
limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection 
against harmful interference in a residential 
installation. This equipment generates, uses 
and can radiate radio frequency energy and, 
if not installed and used in accordance with 
the instructions, may cause harmful 
interference to radio communications. 
However, there is no guarantee that 
interference will not occur in a particular 
installation. If this equipment does cause 
harmful interference to radio or television 
reception, which can be determined by 
turning the equipment off and on, the user is 
encouraged to try to correct the interference 
by one or more of the following measures: 
Reorient or relocate the receiving antenna. 
Increase the separation between the 
equipment and receiver. Connect the 
equipment into an outlet on a circuit 
different from that to which the receiver is 
connected. Consult the dealer or an 
experienced radio/TV technician for help. 
NOTE: FCC Radiation Exposure Statement: 
This equipment complies with FCC radiation 
exposure limits set forth for an uncontrolled 

environment. This transmitter must not be 
co-located or operating in conjunction with 
any other antenna or transmitter. NOTE: 
Changes or modifications not expressly 
approved by Nokia could void the user's 
authority to operate the equipment.

HS-52W_with_FCC&IC_notice.fm  Page 10  Thursday, January 4, 2007  3:23 PM

Содержание A330











Отзывы: