The option buttons should be selected before pressing
the "Start/Pause" button.
F
“DELAY START” button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up
to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set
a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time
the button is pressed, until h24 appears on the display, at which point pressing the button
again will reset the delay start to zero.
“TEMPERATURE” button
The Wash Temperature button allows a reduction in the wash temperature in each
programme.
Each time the button is pressed the temperature decreases until a minimum of 20°C.(The
E
“EASY IRON” button
The Easy Iron function (Not available on COTTON programmes) minimizes creases as much
as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.
MIXED FABRICS
- the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS
– after the final two rinses with no spinning the machine stops in the
final rinse stage and the
option indicators blink
.
The load is held in the water in the drum, thus reducing creasing and enabling easier ironing.
WOLLENS/HAND WASH
– after the final rinse the load is held in the water in the drum, thus
reducing creasing and enabling easier ironing and the
option indicators blink
.
To complete the cycle press the Easy Iron button and the machine will pump out the water
and complete the cycle.
If you do not want to spin the clothes and activate drain only:
- Turn the programme selector to the "
OFF
" position;
- Select programme drain only ;
- Switch on the appliance again by pressing the "
Start/Pause
" button.
D
temperature will become room temperature if all lights turn off.)
