TECO TPO35CFWCT, Руководство пользователя

Страница: 6 / 24

INSTALLATION INSTRUCTIONS
Your window slider kit has been designed to fit most standard vertical and
horizontal window applications,however, it may be necessary for you to modify
some aspects of the installation procedures for certain types of windows. The
window slider kit can be fastened with screws.
NOTE: If the window opening is less
than the minimum length of the window
slider kit, cut the end without the hold in
it short enough to fit in the window
opening. Never cut out the hole in
window slider kit.
WINDOW SLIDER KIT INSTALLATION
1 :Parts:
(��)
L____.
Cut on opposite
side of hole.
A) Panel (Optional second slider panel not supplied).
B) Panel with one hole.
C) Panel without hole (Optional panel not supplied).
D) Screw to lock window kit in place.
2: Assembly:
Slide Panel B and C into Panel A and size to widow width. Windows sizes vary.
When sizing the window width, be sure that the window kit assembly is free from
gaps from gaps and/or air pockets when taking measurements.
3: Lock the screw into the holes that correspond. With the width that your window
requires to ensure that there are no gaps or air pockets in the window kit
assembly after installation.
NOTE:
TECO PUSH/PULL WINDOW KIT (MODEL:TPPWKITT) is also available for purchase.
Contact your local retailer, sales agency or check TECO Australia website for more information.
4