TECO TECOMAT FOXTROT IB-1301, Основная документация

Страница: 9 / 16

Basic documentation for IB-1301 module
1. DESCRIPTION AND PARAMETERS
The IB-1301 expansion module is designed for the scanning of up to 12 binary signals
24 V DC with a common pole (minus or plus to way of connection), type 1 according to CSN EN
61131. The module is equipped with removable screw-type connector. Inputs DI0 to DI3 allow
to carry out a special functions conform to inputs on CP-1004 basic module. The inputs are gal-
vanically isolated from the internal circuits (including power supply and communication) and
groups of inputs are separated one from another. The status of each input is indicated by LED
at the front module panel.
1.1 BASIC PARAMETERS
Product standard Č SN EN 61131-2:2005 (idt IEC 61131-2:2003)
Protection class of electrical object
Č SN EN 61140:2003 (idt IEC 61140:2001)
II
Connection removable screw-type connections, max. 2.5 mm
2
con-
ductor per terminal
Type of equipment built in
Power supply (SELV) typ. 24 VDC
Internal protection No
Typical power input 1 W
Max. power input 2 W
Power supply galvanic isolation from internal
circuits
No
Coverage
-
Č SN EN 60529:1993 (idt IEC 529:1989)
IP10B
Height 105 g
Dimensions 90 × 53 × 65 mm
1.2 OPERATIONAL CONDITIONS
Class of ambient influence - Č SN 33 2000-
3:1995 (mod IEC 364-3:1993)
normal
Operating temperature range 0 °C to +55 °C
Permissible temperatures during transport –25 °C to +70 °C
Relative humidity 10 % to 95 % without condensation
Atmospheric pressure min. 70 kPa (< 3000 m over the sea level)
Degree of pollution –
Č SN EN 60664-1:2004 (mod IEC 60664-1:1992)
1
Overvoltage category of installation -
Č SN EN 60664-1:2004 (mod IEC 60664-1:1992)
II
Working position vertical
Type of operation continuous
Electromagnetic compatibility
Emissions -
Č SN EN 55022:1999 (mod CISPR22:1997)
class A*
Immunity min. according to requirements Č SN EN 61131-2:2005
Sinusoidal vibration resistance ** 10 Hz to 57 Hz, amplitude 0.075 mm,
57 Hz to 150 Hz, acceleration 1G
* In indoor conditions (i.e. such conditions, where using of radio and TV sets can be supposed in a dis-
tance of 10 m from the mentioned equipment), the product can cause radio disturbances. It might be
required in such cases that the user takes necessary measures to avoid this.
** Fc test according to Č SN EN 60068-2-6 (idt IEC 68-2-6:1995), 10 cycles in each axe.
9 TXV 113 01