TECO Platinum 3D Inverter Series, Руководство пользователя

Страница: 5 / 20

2
CAUTION
•
Turn off the air conditioner and disconnect the power if you are not going to use it for a long time.
•
Turn off and unplug the unit during storms.
•
Make sure that water condensation can drain unhindered from the unit.
•
Do not
operate the air conditioner with wet hands. This may cause electric shock.
•
Do not
use device for any other purpose than its intended use.
•
Do not
climb onto or place objects on top of the outdoor unit.
•
Do not
allow the air conditioner to operate for long periods of time with doors or windows open, or
if the humidity is very high.
ELECTRICAL WARNINGS
•
Only use the specified power cord. If the power cord is damaged, it must be replaced by the
manufacturer , its service agent or similarly qualified persons in order to avoid a hazard.
•
Keep power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty
plugs can cause fire or electric shock.
•
Do not pull power cord to unplug unit. Hold the plug firmly and pull it from the outlet. Pulling directly
on the cord can damage it, which can lead to fire or electric shock.
•
Do not
modify the length of the power supply cord or use an extension cord to power the unit.
•
Do not
share the electrical outlet with other appliances. Improper or insufficient power supply can
cause fire or electrical shock.
•
The product must be properly grounded at the time of installation, or electrical shock may occur.
•
For all electrical work, follow all local and national wiring standards, regulations, and the Installation
Manual. Connect cables tightly, and clamp them securely to prevent external forces from damaging
the terminal. Improper electrical connections can overheat and cause fire, and may also cause
shock. All electrical connections must be made according to the Electrical Connection Diagram
located on the panels of the indoor and outdoor units.
•
All wiring must be properly arranged to ensure that the control board cover can close properly. If the
control board cover is not closed properly, it can lead to corrosion and cause the connection points
on the terminal to heat up, catch fire, or cause electrical shock.
•
All
wiring and disconnection must be incorporated in the fixed wiring in accordance with the wiring
rules.
Disposal Guidelines
This marking shown on the product or its literature, indicates that waste electrical and
eletrical equipment should not be mixed with general household waste.
• Young children should be supervised to ensure that they do not play with
the appliance and packaging.
• Packing (e.g. wraps, polystyrene etc.) can be dangerous for children. There
is a risk of suffocation. Keep packaging materials away from children.
•
Contact your local authorities for correct method of disposal. Dispose of all
packaging in a responsible manner in accordance with local regulations.