Tecnoware EVO DSP MM 1.3 Rack Tower, Руководство пользователя

Страница: 6 / 66

ENGLISH
User’s manual 2 UPS EVO DSP MM Rack Tower
1 Introduction
The UPS EVO DSP MM RACK TOWER (UPS means Uninterruptible Power Supply) is the result of constant
technological research aimed at obtaining the best performance at the lowest cost.
EVO DSP MM RACK TOWER is an advanced ON-LINE UPS built specifically to protect your computer from any
irregularities in the AC line (for example blackouts, brownouts, over voltages, micro-interruptions), which often
cause damage to hardware and software.
All that is possible because EVO DSP MM RACK TOWER is a Double-Conversion ON-LINE UPS.
Under normal AC line condition EVO DSP MM RACK TOWER provides an automatic Output Voltage regulation from
the Rectifier and Inverter blocks and filters out frequently occurring electrical disturbances (high Voltage
transients, spikes, interferences, etc.), thus protecting the devices connected to its outlets. During a power
failure, EVO DSP MM RACK TOWER continues supplying adequate AC power (with a true sine wave) to all
connected devices through its internal batteries and by its DC/AC converter (Inverter).
EVO DSP MM RACK TOWER protects the devices from accidental overload or Inverter fault by an Automatic Bypass
that directly connects the AC Input line with its outlets.
EVO DSP MM RACK TOWER models are factory-equipped with RS-232 and USB interfaces, which may be used for
notify to a computer a power failure or a Low Battery condition: this allows automatic data backup during an
extended blackout with the most common operating systems (Windows, Linux, Unix, etc). Thanks to Interfaces,
UPS DSP MM can communicate the several made measurements (Input/Output Voltage, batteries, absorption,
Frequency, etc.), and can also be programmed in order to start-up or shutdown automatically at fixed times.
Read this manual carefully before using the EVO DSP MM RACK TOWER ; it includes
important safety warnings and useful advices for correct use and installation.
EVO DSP MM RACK TOWER is constantly being developed and improved: consequently, your unit may differ
somewhat from the description contained in this manual.
This manual includes the following models:
•
EVO DSP MM 1.3 Rack Tower (1300VA)
•
EVO DSP MM 2.6 Rack Tower (2600VA)
•
EVO DSP MM 4.0 Rack Tower (4000VA)
In this manual EVO DSP MM RACK TOWER will simply be referred to as UPS.
EVO DSP MM RACK TOWER models are made from a single unit that contains the electronics parts and the
batteries.
However EVO DSP MM RACK TOWER models are predisposed to the connection with external BATTERY BOX units in
order to increase the autonomy.