DESCRIPTION
Hot and harsh environments require adequate equipment. The
129LC
(liquid cooled) series
stainless steel camera housing is designed to protect cameras and optics in the most severe
applications. This series is conceived to fit cameras that are too small to need a 168LC series camera
housing, but need an extra protection for very hot and dirty places, such as ovens and foundries.
The front flange is engineered to have an air barrier, useful both to cooling down and keeping the
front window clean. To avoid oil and dust particles and to grant clean air for the barrier, a filtering
battery is available as optional. The
129LC
series camera housings are made by two AISI316L
stainless steel tubes close at their ends in a way that a special chamber that allows water or other
cooling liquids to cool down the housing. This camera housing series has been designed with
highest quality materials and production processes, paying particular attention on good looking
solutions and on mounting and maintenance tasks ease.
MODELS
129LC
Camera housing (L=360mm)
129LC-L
Camera housing (L=460mm)
129LCIRZ70
Camera housing (L=360mm) for IR viewings (Zinc Selenide front window)
129LCIRZ70-L
Camera housing (L=460mm) for IR viewings (Zinc Selenide front window)
129LCIRG70
Camera housing (L=360mm) for IR viewings (Germanium front window)
129LCIRG70-L
Camera housing (L=460mm) for IR viewings (Germanium front window)
INSTALLING THE HOUSING
Before performing any operation, turn off the power. Only qualified
personnel can perform electrical operations according the regulations
in force.
Prior to installation and operation, read carefully this manual of
instructions.
1. Extract the rear flange by removing the six
screws. Be careful not to lose the O-Ring.
Screws
2/4
