Tecnosystemi 11132199G, Руководство пользователя

Страница: 4 / 7

4
1. If not used for long periods, remove the batteries to avoid liquid leakages that can damage the device. If the
LCD screen appears opaque, replace the batteries (used and new batteries must not be used at the same time). It
is not necessary to re-set the model code when you replace the batteries.
2. The display normally only shows the current time. By pressing “Enter” you can also display the code on the
screen. After five seconds the display returns to time-display mode.
3. If the timer turning on/off operation does not work, check for any radiofrequency interferences between the
remote control and conditioner: the operation can only work if the conditioner only receives the timer on/off
signal exclusively from the remote control.
4. The manufacturer reserves the right to change the product's parameters and operations.
SLEEP "SNOOZE" FUNCTION
TECHNICAL PARAMETERS
In the summer months, press the “SLEEP” button with unit in cooling mode: the temperature will increase by
1°C per hour in the first two hrs. The function will automatically stop after eight hrs. In winter, press the “SLEEP”
button with the unit in heating mode: the temperature will fall by 1°C per hour during the first two hrs. The
function will automatically stop after eight hrs. After configuring the sleep "snooze" function, point the remote
control towards the conditioner's receiver from an effective distance. Otherwise the function “SLEEP” cannot be
carried out.
MAX. CONTROLLABLE DISTANCE: 8 meters
Power-supply: DC 3 V
Batteries: No. 2 AAA BATTERIES (UM-4. R03)
Dimensions: h 165 mm. x w 55 mm. x d 25 mm.
Weight: approximately 100 g (without batteries)
WARNING