TS VIII PNEUMATIC MOTOR
16
CAUTION
Observe the direction and position of the motor stator and cylinder head.
6.
Carefully clean and blow on all parts.
7.
Grease the motor plates and bearings with SAE10 oil.
8.
Place the plates (5) in their housings.
9.
Place the motor stator (4) in its correct position and insert the upper cylinder head (3)
together with the bearing and mount the seeger ring (2).
10.
Take the rotor assembly and insert it into the housing vertically and without turning so
that the rod (6) is inserted into the bottom of the motor housing.
11.
Once the rod (6) is positioned in its housing, screw the whole assembly together and
tighten with the strap wrench.
12.
Connect the intake tube to the motor.
6.3
CLUTCH ADJUSTMENT
1.
Remove the fixing ring.
2.
Turn the slotted nut clockwise or anti-clockwise to tighten or loosen the clutch.
3.
Push the ring back into the groove.
Содержание Roscamat TS-VIII
Страница 1: ...INSTRUCTION MANUAL TS VIII PNEUMATIC MOTOR...
Страница 23: ...TS VIII PNEUMATIC MOTOR 23 NOTES DATE DESCRIPTION...
