Tecnogas TNP HD ZEUS 1, Руководство пользователя

Страница: 11 / 13

SWITCH OPERATION
receiver Timer Light Minus Plus Power
Button functions
Power : To turn on/ off the cooker hood
Plus : To increase the fan speed or deration of delay-off or set the time of hour
Minus : To decrease the fan speed or deration of delay-off or set the time of minute
Light : To turn on/ off the LED light
Timer : Delay-off timer set
Standby mode: Once the cooker hood is connected firmly to the power socket
and turned on, the cooker hood will enter into standby mode. You can press the
power key for the start of the motor or light key for Lamp working .
Delay-off timer :Press the Timer button for about 1 second to turn on the delay-off timer.
The cooker hood is set for 1-15 minutes delay-offer timer. After the user press
the timer button, the delay-off timer will start activates in about 5 seconds.
Once the cooker hood reaches the 15minutes, the cooker hood
will be turned off automatically.
When use Timer , the Digital screen will show the delay-off timer.
If user do not use the timer , the screen will show the Normal time.
Light: The user can turn on the cooker hood illumination through pressing
on the 'Light' button. Press once to turn it on and once more to turn it off.
The light function is independent from other function which will not be affected
by other functions or adjustment.
Fan speed setting: The cooker hood is operated at 3 fan speed setting.
The user may adjust the fan speed setting through pressing on Minus or Plus button
to have different speeds.
Note: Light settings are independent from other settings (including delay-off)
and lights have to be manually turned on or off.
1. Remote control sensor receives infrared(IR) signal
from the remote control.
The maximum distance for IR data transmission is 5m
and requires line of sight.
The transmission distance may vary depanding on temperature
and remote control battery condition.
2. Light settings are independent from other setting
(including power-off delay) and lights have to be manually
turned on or off.
3. The system saves user configurations, settings such as light ,
timers and blower(motor) speed will returned on.
MAINTENANCE & CLEANING
Do not start any maintenance and cleaning work unless the appliance is disconnected
from the power supply. Make sure the power is turned off and the plug
is withdrawn out from it completely.
Cleaning the hood casing
1. Clean the hood casing periodically with warm soapy water and clean cotton cloth.
2. Do not use corrosive or abrasive detergent and steel wool or scoring pads,
which will scratch and damage the stainless steel surface. For heavier soil,
please use only the mild degreaser with warm water to clean it.
3. For stainless steel hood, user may use stainless steel cleaner to clean the surface
of the hood. Please avoid the cleaning solution penetrate into the control panel.
Do not leave the cleaner on the hood too long as this may damage to the surface.
Use soft towel to wipe off the cleaning solution, gently rub off any stubborn spots.
Use clean and dry soft towel to dry the hood.
4. The user may buff up the stainless steel hood with stainless steel polish after cleaning.
5. Do not allow stains and dirt to accumulate on the hood casing.
6. Do not use ordinary steel wool or steel brushes as it may scratch off and damage
the surface. These scratches and damaged parts may cause rusting in long run.
7. Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to stick
on the stainless steel surface. Many of these compounds contain chemicals,
which may be harmful to the casing. To clean these compounds, rinse it with water
and wipe it dry with a clean soft cloth.
8. Do not use stainless steel cleaner on the control panel as it may spoil the surface
of it or discolour it.
17 18