tecnoelettra TE809, Инструкция по эксплуатации

Страница: 3 / 8

GSM-TE809-EN_rev2.doc Page 3/8
1- GSM COMMUNICATION
1- 1 GSM Preliminary connection instructions
The controller is equipped with a TE809 GSM system easy
to use.
1- 1.1 Serial cable connection
You can easily connect the GSM modem through the serial
cable 9 poles (code 51C3) male-female.
This cable consists of two connectors:
a) the male connector for the GSM modem
b) the female connector at TE809 side
Connect the cable as shown in the pictures 1 and 2: in figure
1 you can see the connection to the TE809.
In figure 2 you can see the connection with the GSM
modem.
1- 1.2 Antenna connection
Connect the antenna to the GSM modem as shown in the
figure. When the antenna connector is fixed to the antenna
and free from barriers you should have a good signal
quality. This antenna has a magnetic base that allows it to
be attached to metal supports without tools.
1- 1.3 Power connection
(8-32Vdc power supply)
Use the included power cord. These are the terminals of the
power cord:
c) free wires for power-on
d) connector on the GSM side
1
B A
2
C D