Tecno A675_T463
6
doesn’t work after several cycles of charging, it indicates the end of its life. You
need to replace it with new battery of specified model.
Do not dispose off the battery with domestic garbage; instead you should dispose
of it in line with the regulations.
1.3Charger Precautions
Socket should be installed near the equipment and should be easy to reach.
Use a 220V , 50~60Hz AC power; otherwise it may cause leakage, excessive heat
and damage to the phone and charger.
Do not short-circuit the charger; otherwise it may cause electric shock, fuming and
damage to the charger.
Do not use the charger when the power cord is broken; otherwise it may cause fire
and electric shock.
If contacted with water or other liquid, the charger must be removed from the
power socket immediately to prevent excessive heat, fire, electric shock and
other problems to the charger.
Do not dismantle or refit the charger; otherwise injury to the human body, electric
leakage and fire may occur.
Do not use the charger in places of high humidity such as bathroom; otherwise
electric leakage, fire and other problems may occur to the charger.
Do not touch the charger, power cord or power socket with a wet hand;
otherwise electric shock may occur.
Do not put heavy objects upon the power cord or refit it. Otherwise electric shock
or fire may occur.
Disconnect the charger with electric power during cleaning and maintenance.
Hold the body of the charger other than the cord when disconnecting the
charger with electric power; otherwise electric shock or fire may occur.
If the contents of this manual are not consistent with your phone, the phone shall
prevail.
1.4Product Material
Handset x1
Battery x1(BAT_BL_8C_TECNO-1650mAh)
Charger x1(TECNO-TML03)
Earphone x1(TECNO-3.5mm-EW-31BT)
