13
14
15
16
No
.
Shortcut Keys
Description
14
15
16
17
18
One T
ouch Cal l 5
Squelch Off Momentary
Squelch Off
Monitor
Talk A
round
To transmit a call quickly
To momentary open the speaker
To always open the speaker
To adjust the condition for incoming signal match
To directly communicate with other radios
Scramble: To encrypt your voice so as to guarantee privacy of your communication
Encrypt: To encrypt your voice and message so as to guarantee privacy of your communication
To enable or disable the VOX function
Scramble/Encrypt
VOX
P
ro
g
ra
m
m
a
b
le
K
e
ys
B
a
si
c
O
p
e
ra
tio
n
s
Note: (1) Long and short press of a key can be assigned with different functions by your dealer.
(2) The TK is programmed as the Emergency Key by default, and is programmable by your dealer.
B
a
si
c
O
p
e
ra
tio
n
s
B
a
si
c
O
p
e
ra
tio
n
s
Turning the Radio On/Off
Rotate the Radio On-Off/Volume Control knob clockwise/
counter-clockwise until a click is heard to turn the radio
on/off.
After turning the radio on, rotate the Radio On-Off/Volume
Control knob clockwise to increase the volume, or counter-
clockwise to decrease the volume.
Digital/Analog switch
Adjusting the Volume
Basic Operations
20
19
Scan On/Off
The function “Scan” allows you to listen to communication
activities on other channels so that you can keep a close
track of your team members. This function is enabled or
disabled by pressing the shortcut key for scan. Contact
your Authorized TecNet Dealer for more information.
Zone
This radio supports up to 64 zones. You can set it by CPS.
LED
VOX
If enabled, the VOX function allows users to transmit
every time the user speaks into the radio directly without
pressing the PTT key.
All LEDs: to enable /disable all LED indications.
TX LED: to set whether the Tx LED indicates during
RX LED: to set whether the Rx LED indicates during
reception.
Scan LED: to set whether the Scan LED indicates in
Scan mode.
transmission.
Low Battery LED: to set whether the Low Battery LED
indicates when the battery is low.
Carrier LED: to set whether Carrier LED indicates when
receiving carrier.
Note: Please contact your Authorized TecNet Dealer
for setting.
call to the contact (a Private Call number) preset for the current
channel.
Note: Your dealer may preset a contact for each digital channel.
The preset contact could be a Private Call number, a Group Call
number or an All Call number.
Receiving and Responding to a Private Call
Responding to a Private Call, after a Private Call is received,
you may press the PTT key within the preset time period to call
back.
In standby mode, pressing PTT key will transmit an individual
Private Call
Each channel can be programmed as either analog channel
or digital channel, if the current zone includes both analog
and digital channels, you may switch between digital and
analog through the channel select knob.
Selection a Channel
Rotate the Channel Selector knob to select a
CH01-CH16 according to the number shown at the bottom
of the channel selector.
channel from
Selecting a Zone
A zone is a group of channels exhibiting the same property, and
is programmed by your dealer. The radio supports up to 64 zones,
each with a maximum of 16 channels. You may select a zone
through the function keys - You may quickly toggle to your
desired zone by pressing the programmed Zone Up or Zone
Down key.
In standby mode, pressing PTT key will transmit a group call
to the contact (a Group Call number) preset for the current
channel.
Note: Your dealer may preset a contact for each digital channel.
The preset contact could be a Private Call number, a Group Call
number or an All Call number.
Receiving and Responding to a
Call
Group
Responding to a
Call, after a
Call is received,
you may press the PTT key within the preset time period to call
back.
Group
Group
Transmitting an All Call
Methods are the same as those in Transmitting a Group Call.
All Call
Making a Call on Analog Channels
To make a call , hold down [PTT] key and speak into the
microphone with normal voice. Please keep the microphone
2.5-5cm away from your mouth.
Note:
1. Hold down [PTT] key and the radio begins to transmit
when LED glows red.
2. When the battery power is lower than normal battery power,
the transmission is prohibited.
Talk Around (TA)
You can continue to communicate in DM mode by pressing
the programmed Talk Around key. Contact your Authorized
TecNet Dealer for more information.
TA Operation
Press the programmed Talk Around key to switch between DM
mode and RM mode.
Monitor (Analog Only)
The monitor function bypasses the programmed signaling
on a channel.
Monitor Operation
Press the programmed Monitor key to enable the
feature . To disable the feature, press this key
again.
Press the programmed Squelch Off Momentary key
to enable the feature. T h e n t h e r a d i o s o u n d s
background noise. To disable the feature, release this key.
Squelch Off Operation
Press the programmed Squelch Off key to enable
the feature. Then the radio sounds background
noise. To disable the feature, press this key again.
Vibration (Optional)
If vibrate is included, this option allows the user to enable/
disable the feature. Contact your Authorized
TecNet Dealer for more information.
Group Call
