Tecnet TDR-2128M, Руководство пользователя

Страница: 12 / 26

G _
4. Erasing
1) Erasing one message
- Select the recorded number you want to erase.
- Press the ERASE button.
- The number of recorded message will blink and the recorded message is heard for 3 seconds.
- Press the ERASE button again.
- To cancel the erasing, press any button except for the ERASE button.
2) Erasing all recorded messages in one folder
- Select the folder which you want to erase at stop mode.
- Press the ERASE button for about 5 seconds.
(At that time, and the related folder icon will blink.)
- Press the ERASE button again for about a second and then, all recorded messages are erased.
- To cancel the erasing, press any button except for the ERASE button.
5. Adjusting Volume
- You can adjust Volume level by pressing / - button.
(But the volume will not be adjusted during recording.)
6. Hold Function
- If the HOLD switch is set upwards, any button is not operated.
- If the HOLD switch is set upwards, the key icon is displayed on LCD, which means Hold function is
set.
- To release the hold function, move the HOLD switch downwards.
When you set the HOLD switch at stop mode, the recorder will be automatically turn off.
7. Setting the VOS mode
- Press the MODE/PAUSE button 1 time and then, LCD displays “VOS” letter.
- At that time, select “on” mode by the Volume button and press the FOLD/REPEAT button.
- When there is no voice or no sound during recording after the “VOS” setting, the LCD displays
“SENSE” letter and the unit stop recording. With voice voice or sound heard, the “SENSE” letter
disappear and start recording again.
8. Setting Mic sensitivity
- Press the MODE/PAUSE button 2 times and then, LCD displays “REP” letter.
- At that time, select “HI” or “LO” mode by the Volume button and press the FOLD/REPEAT button.
- After finishing the selection, the LCD displays the selected “HI” or “LO”.