Tecnet HL-1500, Руководство пользователя

Страница: 7 / 16

L
AND
M
OBILE
R
ADIO
HL-1500 SERIES
L
AND
M
OBILE
R
ADIO
HL-1500 SERIES
Operation Operation
12 11
2) Low/High Functions of Squelch
This is a sensitivity adjustment function that
allows for communication at a desired level.
Press the "Function" button twice to select
Squelch system. The icon " " will begin flash-
ing. Select Low/High by pressing the Up/Down
buttons. The selected function will be stored auto-
matically. If no buttons are pressed within 5 sec-
onds after selecting function, the screen will
revert to the main display. Press the PTT button
to finish and exit the function mode.
4) Transmit
Select a channel using the Up/Down buttons.
Press and hold the PTT (Push-To-Talk) button
and speak into the microphone. The LED
indicator is activated (RED Color) and the trans-
mission icon will appear on the display.
Pressing and holding the PTT button with the
Up/Down button at the same time will select
High/Low Transmit Power.
5) Monitor
Pressing the monitor button will open the squel-
ch button. Press the 'M' button to monitor.
Press the 'M' button for two seconds to lock
monitor continuously. To release monitor lock,
press the 'M' button again.
6) Function
Use this button for selecting or releasing
functions.
Use the Up/Down buttons to reset
options. Press the PTT button to finish after
resetting the options. Press the "Function"
button to switch to the next function. resetting
the options. Press the "Function" button to
switch to the next function.
If no buttons are pressed for the 5 seconds,
the selected function mode will be cancelled.
Reset the options using
the Up/Down buttons.
Press the 'Function' button
twice to select- select LOW
Select a channels using
the Up/Down buttons.
Press the 'M' button shortly
to monitor the channel.
Press the PTT button to finish
after resetting the options.
Press the 'Function' button
twice to select- select HIGH
1) CHANNEL SCAN
This function helps automatically find all channels
used by the radio. Select the Channel Scan by
pressing the "Function" button once.
The icon " " will be indicated on the dis-
play.
Select On/Off by pressing either the Up or Down
button.
The unit will now begin scanning and the appro-
priate channel numbers will scroll on the display.
Select the Channel Scan pres
-sing the 'Function' button
once