TECNARE V 10, Руководство пользователя, Страница: 25 / 28

V series User’s Manual
25/28
5.3 RIGGING
5.3.1 Safety
Flown Systems
•
Installation and set up must be carried out by qualified personal.
•
Inspect the all the rigging components for damage before assembly. Do not use
damaged parts. Contact your supplier for replacements.
•
Ensure that motor hoists, hoist control systems and ancillary rigging components are
currently certified as safe and that they pass a visual inspection prior to use.
•
Ensure the work area is isolated from public access.
•
Do not leave the system unattended during the installation process.
•
Do not leave any object on top of the system. It may fall when the system is flown
and is likely to cause injury.
•
Secondary safety steels must be installed once the system has been flown to the
operating height.
•
Ensure that the system is secure and prevented from pivoting around the motor
hoist.
•
NEVER use other item than Tecnare accessories.
•
When flying outdoor systems ensure that the system is not exposed to excessive
wind or snow loads and is protected from rainfall.
•
When deploying Tecnare Systems always wear protective headwear, footwear and
eye protection
•
Ensure that all local and National regulations regarding the safety and operation of
flying equipment are understood and adhered to.
Ground Stacking
•
Always employ safe lifting procedures and never attempt to build stacks without
sufficient personnel and equipment.
•
Never allow anyone to climb onto a ground stacked PA system.
•
If the stage surface slopes, ensure that the system is prevented from sliding
forwards due to vibration.
•
For outdoor systems ensure that the system is protected from wind forces which
might cause the ground stack or become unestable.
•
Apply the same attention to all safety matters when de-stacking systems.