TECNARE MA-2400 Скачать руководство пользователя страница 2

Connect this unit s power cord only to an AC outlet of the type stated in this ow

'

-ner s Manual or as marked on the unit. Failure to do so is a fire and electrical

'

shock hazard.

Do not allow water to enter this unit or allow the unit to become wet. Fire or elec

-trical shock may result.

Do not place a container with liquid or small metal objects on top of this unit

.

Liquid

or metal ojects inside this unit are a fire and electrical shock hazard.

Do not place heavy objects, including this unit, on top of the power cord. A damage

power cord. A damaged power cord is a fire and electrical shock hazard . In  particular,

be careful not to place heavy objects on a power cord  covered by a carpet.

INSTALLATION

£

Operation

£

Do not scratch, bend, twist, pull, or heat the power cord. A damaged power cord is

a fire and electrical shock hazard.

Do not remove the unit cover. You could receive an electrical shock. If you th

'

ink

internal inspection, maintenance, or repair is necessary, contact your dealer.

Do not modify the unit. Doing so is a fire and electrical shock hazard.

If lightning begins to occur, turn off the power switch of the unit as soon as possible,

and unplug the power cable plug from the electrical outlet.

If there is a possibility of lightning, do not touch the power cable plug if it is still

connected. doing so may be an electrical shock hazard.

In case an abnormality occurs during operation

£

If the power cord is damaged(i.e., cut or a bare wire is exposed), ask your dealer

for a replacement. Using the unit with a damaged power cord is a fire and elect

-rical shock hazard.

Should this unit be dropped or the cabinet be damaged, turn the power switch off,

remove the power plug from the AC outlet, and  contact your dealer. If you con

-tinue using the unit without heeding this instruction, fire or electrical shock may

result.

If you notice any abnormality, such as smoke, odor, or noise, or if a foreign object

or liquid gets inside the unit, turn it off immediately. Remove the power cord

from the AC outlet.Consult your dealer for repair. Using the unit in this condition

is  a fire and electrical shock hazard.

PRECAUTIONS

WARNING

01

Содержание MA-2400










Отзывы: