Indicator Light
Disassembling the Battery
Push the button, take the battery out as fig.3a / 3b / 3c shown direction. Separate it from the
body.
fig.5a
Push
Pull
fig.3a
fig.3b
fig.3c
Push
Push
fig.4a
fig.4b
Battery-charging
This indicator show the battery capacity.
When four sections show up, the battery is fully charged.
When just one section left (See fig.5a), bleeping sounds on, accompanied by vibration to
remind users to stop work and get battery charged. The frequency is bleeping sounds occur
every 30 seconds and vibration occurs every 2 minutes. After the warnings occur around 15
minutes, the battery indicator gets flashing, which shows there should be at most 15 minutes
left before the blower off (Airflow low speed 170+lpm).
Remove battery pack from blower assembly. Connect charger cord to battery terminal (See
fig.5b).
When the indicator light on charger turns from red to green (See fig.5c) , never stop it
immediately and please keep charging for another 0.5h.
Battery
Charging
Terminal
Charger
Cord
Battery
fig.5b
fig.5c
Assembling the Battery
Fitting the battery to the blower body, push until hearing ‘Click’ sound. (see fig.4a / 4b)
6
