http://www.teclast.com
1
Tips
◆Please
note the nominal battery duration refers to the longest time can be
achieved with minimum power consumption. The real time power duration
might be varied in di
ff
erent usage scenario.
◆
Volume calculation:
1. The volume calculation is di
ff
erent between hardware manufacturer
(1MB=1000KB) and operating syste (1MB=1024KB).
2. Windows system occupies some of the disk space.
◆The
nominal battery capacity is count calculating the actual charge amount
during charging and discharging, deviation exist by using third-party tools to
detect the battery capacity.
Caution
Thank you for purchasing Teclast product. Please read this manual carefully
before using the produ
ct to gain maximum benefits.
1. The new battery is only able to achieve the best performance after two to
three times fully charge and discharge.
2. To prevent data loss, it is recommended to backup important personal data
regularly especially before performing
firm
ware upgrade. We are not
responsible for any losses caused by data loss.
3. Please don’disassemble the device
by yourself as it has high precision.
4.
Please
avoid strong beat and splashing water drop on device as it will
cause physical damages.
5.
Please
avoid using the device in the following environments: high
temperature, low temperature, humid, dusty, powerful magnetic
field
and
long-term exposure under sunlight.
6.
Please
only use the battery, charger and accessories which safety is
approved by manufacturer. It will be violate the warranty regulations or may
be dangerous if you use an
y other unqualified accessories.
7. Instructions for installing non-T
eclast official Windows or Linux
s
ystem：
◆The
default system is the Windows 10 home version. We do not recommend
to install
Lunux,
unix and other Windows systems. It may cause your device to
fail to boot up.
8. Notes f
or the first boot：
◆Be
fore using the device for the
first
time, please charge the battery for 30
minutes and then turn it on.
9. About disassembling：
◆Do
not attempt to disassemble, repair or modify the product. It may cause
product brok
en, shock and fi
re.
