TECLABEL DT039-50, Руководство пользователя

Страница: 15 / 42

9
3.2.2 Loading External Media (For DT2205 model only)
1. Open the printer’s top cover and separate the media holders to fit the media width.
2. Press down the media holder lock switch to fix the media holder.
3. Feeds the media through the rear external label entrance chute. And place the paper,
printing side face up, through the media guides, media sensor and place the label leading
edge onto the platen roller.
4. Close the top cover gently.
5. Use “Diagnostic Tool” to set the media sensor type and calibrate the selected sensor.
(Start the “Diagnostic tool” Æ Select the “Printer Configuration” tab Æ Click the “Calibrate
Sensor” button)
Rear external
label entrance