Reconnection
There is a connection code for this mouse. High temperatures, electro-magnetic fields or
vibration may influence the code signal and the mouse may need to be reconnected.
1. Ensure the battery voltage is correct; if the voltage is low, replace the batteries.
2. Press the middle key(scroll wheel) to reconnect.
3.Unplug the Nano receiver and plug in the USB port again.
Intelligent Power Saving (IPS)
The mouse is equipped with Intelligent Power Saving (IPS) function.
• When the USB Nano receiver is disconnected or the PC is switched off, the mouse will
automatically switch off to conserve power.
• If the mouse is not used for 5 seconds, it will automatically drop to the first level of IPS. To
wake the mouse, click any button.
• If the mouse is not operated for 9 minutes, it will automatically drop to the second level of
IPS -- sleep mode. To wake the mouse, click any button.
Attention
1. To maximize battery life, it is recommended to use the mouse on a white or light color
surface. As the mouse might not work smoothly on some special surfaces, such as smooth,
dark or black, reflecting or 3D mouse pad surfaces.
2. If not operated for 8 minutes, the mouse will enter auto-sleep mode. Press any key or scroll
wheel to activate the mouse again.
3. Do not use the mouse on a glass or mirrored surface, as these surface will cause the mouse
temporarily fail to work.
4. Avoid using the mouse on a metal surface, such as iron, aluminum or copper which will
shield the radio frequency transmission, slow down the mouse presenter’s response time or
cause temporarily fail to work.
5. If your PC has a metal case that contains aluminum or magnesium, use the mouse by the
side of the PC. The display panel may interfere with the radio frequency if you use the
mouse directly in front of the PC.
13
