Note: If two devices are charging at the same time, please make sure
the total charging current less than "Total USB Output = 5V/2.5A
(max)"
Disclaimer
Every effort has been made to ensure that the information and
procedures in this guide are accurate and complete, no liability can be
accepted for any errors or omissions and we reserve the right to make
any changes without further notice to any products mentioned herein.
Warranty
We warrant that product from authorized distributors will meet the
applicable product specifications and be free from all defects in
design, assembly, material and workmanship. Please contact
TECKNET retailers, or visit our website for more information about the
product.
Warning:
Before using this product for the first time, please carefully read and
follow all instructions and safety warnings.
1.Keep the charger away from water or fire; the storage and operating
environment must be within a temperature range of 0º – 40ºC.
2.In OCP/OVP mode, the charger will stop charging the devices.
3.To re-set the device and activate the charging process, remove the AC
charger from the AC socket, wait for 3 minutes and then re-connect it.
4.This charger does not support ALL devices; some specific mobile
devices have to use its original AC charger.
5.Please do not modify, disassemble, open, drop, crush, puncture and
shred the product.
6.Do not put this product in a damp environment, under direct sunlight or
expose to high temperatures.
7.Misuse, dismantling, mishandling or other operation of the product that
fails to comply with this manual may result in damage to your
connected device or to the USB Charger Hub. In the event of damage
resulting from such types of actions, TeckNet is not liable for
compensation or maintenance responsibility.
8.This product is not a toy, keep it away from children and ensure that all
persons who use the product read and follow these instructions.
3
