TECHWOOD TSC-2238, Инструкция по эксплуатации

Страница: 9 / 11

HOW TO USE
1. Make sure that your hands are completely dry before plugging in.
2. Plug in and set switch to the required position
3. Once your hair is dry set the switch off and unplug the dryer.
Switch for temperature and Switch for speed control.
Heater switch
Position l Low temperature
Position
II Medium temperature
Position
III High temperature
Speed switch
​
Position 0 Off
Position I
Gentle stream of air
Position II
Strong stream of air
Cool switch
​ This hair dryer is equipped with a " Direct fresh Air " key;
Press this button to immediately get fresh air in order to better determine
the undulating hair.
The air concentrator allows direct air to a specific location.
CLEANING AND MAINTENANCE
Always disconnect your dryer before cleaning.
Do not put the appliance into water.
Clean the dust and hair by brush thermally.
Clean the appliance with a slightly damp cloth and dry it up with a dry cloth.
Never use gritting, of metal brush or another cutting object.
Do not use abrasive cleaners.
Disassemble, periodically, the air inlet grid located at the rear
of the unit.
To do this, press the two sides of the grid (as shown), to clear
the grid and clean the suction of "hair or other small impurities"
came under the protection grid.
ALWAYS UNPLUG THE UNIT BEFORE PERFORMING THIS
OPERATION.
9