● In order to increase the battery life span charging should be done in one
uninterrupted cycle after full discharging.
● When the battery is being loaded the control lamp is on (
4
).
● NOTE the control lamp will not go out after the battery has been loaded up.
● The appliance may be used after the battery has been loaded up.
● The electric shaver starts its operation when the main switch (
3
) is in “
ON
”
position.
● Softly touch your skin and move in the contrary growth direction of beards
slowly.
● If you stretch your skin tightly, you can obtain better effect.
● Once the shaving is over, push the switch down at once and cover it with the
shelter.
NOTE :
Charging time can’t exceed 12 hours or it affects the life of battery, even
damages the line.
Trimmer
1. Open the back cover and pull off the trimmer.
2. Softly touch your skin in the right-angle direction with the
trimmer and trim slowly.
3. After using, push down the switch and cover it with the
shelter.
4. Press the switch and take off the shelter. Press the
outer-cutter button and take off the outer cutter. Clean the
beards on the outer cutter, the inner cutter and the body
(1 time a week).
5. After cleaning, assemble the outer cutter and the inner cutter
on the original position and cover it with the shelter.
● Don’t press the net shelter.
● Don’t prizes open the net shelter with a screw with a screw driver.
Maintenance
1. Remove the grid, Pressing the buttons (2).
3. Also press the button on the back of the unit to remove the trimmer.
4. Remove the beard hairs with the brush provided and, if necessary, use a damp
cloth to clean the body.
5. After cleaning, reassemble the razor head with body in accordance with the
initial position and place the trimmer on the original position.
6. Replace the cover.
Charging
1. Push the switch down and close electrical power.
2. Connect the plug to the unit then to the main power.
5
Содержание TRZ-108
Страница 1: ...Rechargeable Shaver INSTRUCTION MANUAL 1...
