10
FIRST USE
• remove the appliance and all accessories carefully.
• Clean the outside of the appliance with a damp sponge or cloth and wipe it.
• Install the appliance on a table or flat, stable and horizontal surface. Make sure
there is enough space to operate the machine properly.
• This appliance is intended exclusively for domestic use.
• For good air circulation, place the appliance at least 30cm from the walls of the
furniture.
• Make sure the air inlet and outlet grilles are not blocked.
• To move the air purifier, always lift and move the unit by carrying with hands.
USE
• Unwind the power cord completely.
• Check that the voltage in the country where you are, corresponds to that
indicated on the device.
• Connect the appliance to a good electrical outlet, (earthed if the appliance is
class I), to avoid any danger.
• Never modify the device.
FILTERS INSTALLATION AND REMOVAL
Method, frequency of cleaning, and necessary precautions.
Note : When the “filter change” indicator lights continuously red, it indicates that it
is time to replace the filter.
Turn the device upside down and place it on a soft, stable surface.
1. Unscrew the screw under the base.
2. Turn the base counter clockwise (to the left).
3. Remove the cover.
4. Remove the dirty filter.
5. Insert a new filter into the unit.
6. Replace the base on the unit.
7. Turn the base clockwise.
8. Screw in the retaining screw.
After replacing the filter according to the above ins
tructions, press the “Start”
button for 5 seconds to reset the program.
Th
e “filter change” indicator will go out.
Notes: When the appliance is not in use, switch it off and unplug it.
The combined filter lasts about 6 months.
