5
Close the compartment.
CASE N ° 2
The weight conversion selector is on the back of the
balance.
Locate the selector.
Push the selector to the desired unit
: Kg / Lb / St.
CASE NO. 3
The weight conversion selector is at the back of the
balance but the form is like a button.
Locate the button.
Press the button to select the desired unit: Kg / Lb / St.
Notes: The balance must be lit.
: At each press the unit changes
USE
- Place the scale on a hard, level floor. Avoid carpet and rugs.
- Press on the glass platform to start the balance or gently raise it.
- Do not move for a few seconds. The weight will be displayed continuously
on the display after flashing.
Notes: Stop is automatic After 5 to 10 seconds without any weight
: If you overload the balance, you will hear a constant "beep". Doing so
may damage the balance.
- Overload: When the weighing exceeds 130 kg or 300 pounds, "Err"
appears on the screen.
- Negative weighing: when the weight is below the minimum (6kg or 12
pounds), "0.0" appears on the screen.
- When "LO" appears on the display, change the battery.
- The platform is made of toughened safety glass.
ADVICE
• Keep the glass platform, always dry.
• Never weigh yourself on a wet platform.
• Never drop or shock the balance. The balance may be damaged.
• The balance has sensitive electronic components. For long life, do not
subject the balance to excessive temperature or humidity.
• Use the balance only on a flat surface. A carpet could change the
weighing.
