11
TROUBLESHOOTING
To determine any problem with your tape deck, always check the most obvious possible causes first. If any problem still remains
after your have checked the items below, consult your nearest TECHWOOD dealer.
Problem
Probable Cause
Remedy
No sound while the tape is operating.
Poor tone quality.
REC button can not be operated.
Low volume or weak sound with mute
intervals.
Poor operation of repeat and skip function.
No remote control functions.
Volume of stereo amplifier is set to “0”.
Noise reduction switch is not in a correct
position.
Erase-prevention tabs on cassette are
removed.
Playback head is dirty.
The blank recorded length between two
successive songs is not enough.
Remote control cable is not connected
to receiver.
Not used with compatible receiver.
Adjust the volume properly.
Set the switch appropriate to the kind of
recorded tape.
Cover the slots with adhesive tape.
Clean the head with tape head cleaner.
Make the blank tape length longer than
4 seconds between songs.
Use supplied remote cable and connect
to receiver.
Remote functions only operate with
matching STR-84 or PLR-85 receivers.
SPECIFICATIONS
DECK I (only for playing)
Track system : 4 Track, 2-channel stereo
Tape Speed : 4.8 cm/sec
Motor : DC Motor
Frequency response :
Normal: 40~14,000 Hz
CrO
2
: 40~15,000 Hz
Metal : 40~16,000 Hz
FF and REW Time : 120 sec (C-60 cassette tape)
DECK II (for recording/playing)
Track system : 4 Track, 2-channel stereo
Recording system : AC bias
Erasing system : AC erasing
Tape Speed : 4.8 cm/sec
Motor : DC Motor
Frequency response :
Normal : 40~14,000 Hz
CrO
2
: 40~15,000 Hz
Metal : 40~16,000 Hz
FF and REW Time : 120 sec (C-60 cassette tape)
Wow / Flutter : 0.13% (JIS, WRMS)
S/N ratio : DOLBY B NR OFF : 55 dB (CCIR/ARM)
DOLBY B NR ON : 65 dB (CCIR/ARM)
General
Power Requirements : 120 V AC, 60 Hz
Power Consumption : 11 W
Dimensions (W x H x D) : 435 x 145 x 320 mm
Weight (net) : 4.9 kg
Standard Accessories :
Audio Connection Cord x 2
Remote Control Connection Cord x 1
Owner’s Manual x 1
I m p r o v e m e n t s m a y r e s u l t i n s p e c i f i c a t i o n s a n d
features changing without notice.
I l l u s t r a t i o n s m a y d i f f e r s l i g h t l y f r o m p r o d u c t i o n
models.
