8
Do not locate the heater underneath a fixed power point.
Always ensure that the heater is placed at least 50cm away from furniture,
curtains, walls etc.
Plugging in the Heater
Before plugging the heater into the mains, ensure that your supply voltage is the
same as what is shown on the rating plate of the heater. Try to avoid contact
between the heater and clothes, household linen, furniture, inflammable material
and the power socket.
Turning on and Using the Heater
1. Insert the plug into a suitable socket ensuring the lead is neither near the heat
source nor a tripping hazard
2. Switch the heater on and off by the 2 switches located at the bottom right hand
corner of the heater.
3. Each switch operates one element.
USE
Unroll the power cord completely.
Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
Check that the outlet has at least a 10-AMPERE current carrying capacity.
Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
Never modify the appliance in anyway.
The unit has two selector switches.
Each switch controls a power of 400W
If the two switches are in the ON position, the power will be 800W.
SAFETY DEVICE
This item is provided with a safety device.
The safety device disconnects the apparatus when it is tilted or if it toggles.
A switch under the appliance switches off during tilting.
For the heater working again, raise and place it on its base.
