8
BEFORE FIRST USE
• Unwind the power cord completely.
• Check that the voltage in force in the country where you are
, corresponds to that
indicated on the device.
• Connect the appli
ance into an outlet in good condition (earthed if the appliance is
class I), to avoid any danger.
• Disconnect the power cable from the electrical network before any maintenance
cleaning and fitting of accessories.
• Never modify the device.
• Half fill
the glass bowl with hot soapy water. Wash the interior with a sponge or
clean cloth.
Note : Be very careful because the blades are sharp and can cause serious
injuries.
• Empty the water and rinse thoroughly.
• Dry the bowl, taking all the necessary precau
tions.
USE
1. Hold the bowl by the handle and place it on the base.
2. Place the food to be ground in the bowl.
3. Place the lid on the bowl and press for the whole is airtight
4. Place the filler cap in the centre of the cover.
5. Turn the speed selector to speed 1 for 5 to 10 seconds. If necessary increase
the speed until 2 or select P for pulse function. To turn off please put selector to 0.
6. Let the blender run for 30 seconds.
7. Return the selector to 0 and unplug the appliance.
8. Remove the lid to pour the mixture into a suitable container.
9. Thoroughly, rinse all parts and allow them to dry.
Notes: To insert additional liquid or ingredient, stop the blender, remove the
Measuring cup and fill with the desired product.
Close the dosing cap and resume the operation after having reconnected
the device.
To prolong the life of the product, do not operate the blender more than 2
minutes continuously.
After this time, the blender must cool for at least one minute to avoid
overheating.
After 2 cycles, allow the blender to cool for at least 5 minutes before using
it again.
Warning : never put your hands or other objects in the bowl while the blender is
running; this could lead to serious injury and damage to the mixer.
