8
2. Crumbs come out from the suction nozzle.
or
3. Each time after use.
Using the appliance to suck up liquids
Warning :
Never use the appliance to suck up any other liquid than cold water.
Do not exceed the indicated MAX level when sucking up liquids. (the MAX
level must always be measured when the appliance is in the vertical position,
with the suction inlet facing down).
When sucking up liquids, always keep the appliance in the vertical position,
with the suction inlet facing downwards. Never place the appliance in any other
position and never allow liquids to come into contact with the motor.
How to do :
Use the liquid suction attachment as final attachment ; apply pressure to it to
attach it.
Push the switch on/off forward to switch the appliance on.
Keep the appliance on with the suction inlet facing down at all times.
To switch the appliance off, Pull the switch on/off back.
Note
: Empty the container immediately after use and wash the filter.
Rinse the container and the filter in cold water and let all parts dry completely
before reassembling them.
How to empty the container and clean the filter
Press the opening button and unhook the dust container.
Remove the dust filter from the inside of the container and empty the
container.
Clean the motor filter and, if necessary, clean the inside of the container with a
dry cloth or sponge.
Replace correctly the motor filter in the container.
Reassemble again the container and the body, inserting at first the lower part
and then the upper part, to obtain the complete closure
Note
: After an intensive or long use, it is necessary to change the motor filter with
a new one.
Don
’
t use the device if the motor filter is broken or worn out.
CLEANING AND MAINTENANCE
Before cleaning, Always : switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
