TechVision PBS2L1W2-2, Руководство пользователя

Страница: 27 / 53

22
Network Camera User Manual
no man’s areas, etc.
Go to Config

Event

Intrusion interface as shown below.
1. Enable region intrusion detection alarm.
2. Set the alarm holding time and choose whether to trigger Email.
3. Click “Save” to save the settings.
4. Set the alarm area of the intrusion detection. Click the “Area” tab to go to the interface as
shown below.
Set the alarm area number on the right side. Up to 4 alarm areas can be added.
Click “Draw Area” and then click around the area where you want to set as the alarm area in
the image on the left side (the alarm area should be a closed area). Click “Stop Draw” to stop
drawing. Click “Clear” to delete the alarm area. Click “Save” to save the settings.
5. Set the schedule of the intrusion detection. The setup steps of the schedule are the same as
motion detection schedule setup (See
Motion Detection chapter for details).
※
Configuration requirements of camera and surrounding area
1. Auto-focusing function should not be enabled for intrusion detection.
2. Avoid the scenes with many trees or the scenes with various light changes (like many
flashing headlights). The ambient brightness of the scenes shouldn’t be too low.
3. Cameras should be mounted at a height of 2.8 meters or above.
4. Keep the mounting angle of the camera at about 45°.