1. DMX 512 protocol
Addressing
The LED DISPLAY on the rear side of the base allows you to assign the DMX fixture address,
which is defined as the first channel from which the item will respond to the controller. If you
set, for example, the address to channel 7, the item will use the channel 7 to 14 for control.
Please, be sure that you don’t have any overlapping channels in order to control each item
correctly and independently from any other fixture on the DMX data link. If two, three or more
items are addressed similarly, they will work similarly. At DMX mode you can choose the
address from 1 to 512.After you connect the item to the mains, the item starts running. When
the item finishes resetting, A-OO1 will flash in the led display and then set the desired DMX
address by pressing the UP or DOWN buttons.
DMX Controlling:
After having addressed all items, you may now start operating these via your lighting controller.
After switching on, the item will automatically detect whether DMX 512 data is received or not.
DMX FUNCTIONS
1-CHANNEL MODE
Channel 1 – white from darkness to full brightness
2.auto
Press the MODE button, the following functions can be achieved by the button ENTER:
SH01-03:: run the preset shows
；
SP01-10: running the preset shows speed adjustments
3.sound active
Not occupied!
4. Synchronization & master /slave mode
Take one item and set the item at auto or sound active as above,then get other items and
press the button MODE, set at SLAVE, confirm by the button of ENTER, then connect the
items at SLAVE to the item at AUTO or sound active, disconnect the items from DMX
controller, the items will work simultaneously. The item at auto or sound active works as
master, others as slave.
LED DISPLAY CONTROL:
Main menu
Sub menu
1.A001
001-512
（
ADDRESS SETTING)
2.CH01
1CH
（
CHANNEL MODES)
3.SH01
ON/OFF
（
PRESET SHOWS
）