TSR 2800-30 Hardware Installation Manual
-11-
The following figure shows how to connect the console port of TSR 2800-30
modularized router and the computer:
Definition of the pins of the console port:
No. Name
Symbol
Remarks
1
Carrier Detecting
CD
It is used to connect the Modem.
2 Data
receiving RXD
Input
3
Data-line device ready
DSR
It is used to connect the Modem.
4 Data
transmitting
TXD
Output
5 Transmission
requesting
RTS
It is used to connect the Modem.
7
Data terminal ready
DTR
It is used to connect the Modem.
8
Signal ground
SG
The cable is used to connect the console port of the TSR 2800-30 modularized
router and the outside console terminal device. One end of the cable is a 8-pin
RJ45 plug and the other end is a 9-hole plug (DB9). The RJ45 plug is put into the
socket of the console port on the TSR 2800-30 modularized router. The inner line
connection in the cable is shown in figure 3-1. The console cable is numbered as
RLC0301.
