Techroutes TSR 2800-10C, Руководство по установке оборудования

Страница: 12 / 20

TSR 2800-10C Hardware Installation Manual
- 10 -
3.2.1 Installing the Machine Box on the Desk
The TSR 2800-10C router can be directly put on the smooth and safe desk.
Note:
Do not put things weighing 4.5 kg or over 4.5 kg on the top of the router.
3.2.2 Installing the Machine Box on the Cabinet
The machine box of the router is fixed on the cabinet through the brackets. When you fix the
brackets, the front template of the router faces forward. The detailed operations are shown in the
following figure:
Caution:
The previous example only describes how to install the router’s hull on one side of a bracket.
The installation on the other side of the bracket is same.
After the brackets are installed, install the router on the cabinet. See the following figure:
3.3 Connecting the Port
3.3.1 Connecting the Console Port
TSR 2800-10C modularized router has one console port and one remote assistant console
port. Its attributes and usage method are described in this section.
The console port has a rate of 9600bps and a standard RJ45 plug, the parity check is an option
for the console port and the flow on the console port can be controlled. Before configuring and
monitoring the router, you must connect the console port and the terminal (such as STAR-510G
+
) or
PC’s serial port through specific monitor cable and then run terminal imitation software (Windows
super-terminal). The cable is provided according to the host. The communication parameters of the
terminal serial port can be set to a rate of 9600bps, eight data bits, one stop bit, no sum check bit
and traffic control.