Techpro TRIDVR-ELE32, Руководство пользователя

Страница: 123 / 300

HDCVI Standalone DVR User’s Manual
153
Figure 4-102
4.11.3 Event
4.11.3.1 Detect
In the main menu, from Setting->Event->Detect, you can see motion detect interface.
See Figure 4-103.There are four detection types: motion detection, video loss,
tampering, and analysis.

The video loss has no detection region and sensitivity setup and tampering has no
detection region setup.

You can see motion detect icon if current channel has enabled motion detect
alarm.

You can drag you mouse to set motion detect region. Please click OK button to
save current region setup. Right click mouse to exit current interface.
4.11.3.1.1 Motion Detect
After analysis video, system can generate a video loss alarm when the detected moving
signal reached the sensitivity you set here.
Detection menu is shown as below. See Figure 4-103.

Event type: From the dropdown list you can select motion detection type.

Channel: Select a channel from the dropdown list to set motion detect function.

Enable: Check the box here to enable motion detect function.

Region: Click select button, the interface is shown as in Figure 4-104. Here you can
set motion detection zone. There are four zones for you to set. Please select a zone
first and then left drag the mouse to select a zone. The corresponding color zone
displays different detection zone. You can click Fn button to switch between the arm