Bluetooth and APP TH892-BT/BTE models only
Compatible with Apple & Android devices.
Search ‘TecHome The Hub’ in your app store.
The Power Point is supplied in 4 versions:
1.
Remote Power Point with remote control only TH892-E (electrician version)
2.
Remote Power Point with remote control only TH892 (DIY version)
3.
Bluetooth / Timer Remote Power Point controller TH892-BT (DIY version)
4.
Bluetooth / Timer Remote Power Point controller TH892-BTE (electrician version)
WARNING
The TH892-E/BTE must only be installed by a qualified electrican!
Installation
Mount the power point unit to the wall/surface as shown below
*DO NOT EXCEED 10AMP TOTAL
The Remote
Adding a remote
3. The Power Point will beep four times to indicate that the remote was paired
successfully.
PowerPoint Usage
RF range = 30 -60 meters
All On/Off Function
The Hub Application
Bluetooth range = 5 – 20meters
Power Point 1
(Change channel with SELECT)
This way up
Power Point 2
(Change channel with SELECT)
Code = 0001
Swipe BACK of remote (magnet) to
the right-hand side of the Power
Point to turn ON or OFF both Power
Points
1.
Select channel 1
on the remote
you want to add.
2. Insert a paperclip into the reset
hole on the back of the remote.
RESET Hole/
button
UP
= Selected Channel On
ALL
= Both Power Points OFF
SELECT
= Change Channel
DOWN
= Selected Channel Off
