REMOTE CONTROL
POWER POINT TH892
(BT, BTE, E, DIY)
INSTALLATION AND INSTRUCTION
MANUAL
www.techome.com.au
[email protected] | +61 (0)7 3297 9797
3
WARNING:
The TH892-E/BTE must only be installed by a licenced electrician!
Warranty:
Proof of Purchase:
This warranty is only valid to the original purchaser and is not transferable. Please
keep your receipt for warranty purposes, please present your receipt when claiming warranty as proof of
purchase date.
Warranty:
This product is warranted to be free from any defects for a period of 12 months (one year) from
the date of purchase, any defects that may occur will be repaired or replaced.
Warranty Procedure:
Please return the faulty product with the valid proof of purchase to the original place
of purchase. The customer is responsible for freight, postage and packing costs when claiming warranty.
Exclusions:
This warranty does not cover: batteries, misuse, packaging, general wear and tear, power
surges, lightning strikes, floods, incorrect installation, damage due to lack of care, modifications or repair by
an unauthorised person.
Maintenance:
If the power supply cord is damaged, it must be replaced by the manufacturer and/or its
service agent or similar qualified person.
THE HUB APPLICATION (BTE/BT MODELS ONLY)
1.
Download TecHome “TheHub”
from the ‘Google Play’ or ‘Apple Store’.
2.
Select “Power Point” in Devices
3.
Enter your PIN or the default PIN “0001”
4.
Select the outlet you want to control
BATTERY REPLACEMENT FOR REMOTE
1.
On the back of the remote control remove the
screw using a small Phillips screwdriver.
2.
Loosen the back by inserting the flat screw drive between
the seams on both sides, top, middle and bottom.
3.
Gently remove the back cover. Replace the battery with a
GP23A 12V battery.
23A 12V
