Installation and technical manual - Rapid Heater SM
Feel good through warmth from electricity - www.technotherm.com
GB
5|
ted to walls. The device comes with a power plug that has to be plugged into
an outlet. The device is designed to be connected to 230V (nominal) alterna-
ting current (AC).
4. Installation of Electricity
The device was developed for an electrical voltage of 230 V (nominal) and an
alternating current of (AC) 50 Hz.
The electrical installation may only be performed according to the user manual
and only by a qualified Electrician.
The device was designed to be used with termination and the connection cab-
le has to be plugged into an appropriate socket at all times. (Notice Permanent
cables may not be used) The distance between the receptacle and the device
hast to be at least 10cm. The connection line may not touch the device at any
time. In case the connection cable is damaged contact the manufacturer im-
mediately!
5. Functions
The desired room temperature is set on the rotary knob 3. Indicators facilitate
the retrieval of the correct room temperature. The temperature range is infi-
nitely variable from about 5 ° C (left) to about 32 ° C (clockwise) adjustable.
Choosing the symbol
*
the “Frost Protection” is automatically guaranteed.
The desired time is set on the rotary knob 4. The knob is adjusted clockwise.
Turning back is not possible for the model 2028.
Model SM 2004 with temperature control
The unit heats up with a power of 2000W up to set on the thermostat room
temperature are reached. After that, the unit switches off and on again al-
ternately. We recommend the adjustment knob to rotate clockwise, until the
desired temperature is reached. Then insert the controller slowly to the left
until the unit turns off.
Model SM 2028 with temperature control and 24h timer
This device has three possible settings:
1:
permanent position “ON”
time switch operation
0: permanent position “OUT”
If your device is operating in the “Time Switch” position, the
model SM 2028 heats up in the chosen time periods by re-
gulated 2000W power. Function temperature controller, see
SM 2004
