E14
Swap
Channel 1
Channel 2
Channel Swap
Move
Select
Exit
a
b
0
a
a
b
0
2). Change the number after channel 2 from
"0" to "8".
3). Select "Channel Swap" , and press [
a
].
4). Press [MENU] to exit.
PC menu
(Available only when
“
PC” is set as the
input source.)
Press [MENU] then [
p
] till
“
PC” menu
screen appears.
PC
H Position
V Position
Clock
Phase
Auto
Move
Select
Exit
a
Press [
a
] to enter, and set the options
as “Common procedure of operation”
described.
H Position:
Adjust the position of picture in
horizontal.
V Position:
Adjust the position of picture
in vertical.
Clock:
When Vertical stripes appears on
the screen, adjust this item.
Phase:
Adjust the phase of picture.
Auto:
Adjust above items automatically.
Generally, it will adjust the picture's location
on the screen, clock and phase, according
to the signal output from the PC you
connected.
In some special instance, the auto adjust
item may not do effect. You may adjust the
position, clock, phase manually.
Channel swap:
Exchange the program information stored
in two different channels. (E.g.: Channel 3
& 8)
Move the cursor by pressing [
o
/
p
], and
input the channel No. by pressing [
b
/
a
] .
1). Change the number after channel 1 from"0"
to "3".
Содержание TF-L32B ATV
Страница 1: ...TF L32B ATV BEDIENUNG SANLEITUNG ...
Страница 21: ...TF L32B ATV GEBRUIKERS HANDLEIDING ...
Страница 41: ...USER MANUAL TF L32B ATV ...
