Technosoft 2020
6
IO-iMOTIONCUBE Technical Reference
1 Safety information
Read carefully the information presented in this chapter before carrying out the drive
installation and setup!
It is imperative to implement the safety instructions listed hereunder
.
This information is intended to protect you, the drive and the accompanying equipment during the
product operation. Incorrect handling of the drive can lead to personal injury or material damage.
Only qualified personnel may install, setup, operate and maintain the drive. A “qualified person” has
the knowledge and authorization to perform tasks such as transporting, assembling, installing,
commissioning and operating drives.
The following safety symbols are used in this manual:
WARNING!
SIGNALS A DANGER TO THE OPERATOR WHICH MIGHT
CAUSE BODILY INJURY. MAY INCLUDE INSTRUCTIONS TO
PREVENT THIS SITUATION
CAUTION!
SIGNALS A DANGER FOR THE DRIVE WHICH MIGHT DAMAGE
THE PRODUCT OR OTHER EQUIPMENT. MAY INCLUDE
INSTRUCTIONS TO AVOID THIS SITUATION
CAUTION!
Indicates areas SENSITIVE TO electrostatic discharges (ESD)
WHICH REQUIRE HANDLING IN AN ESD PROTECTED
ENVIRONMENT
1.1 Warnings
WARNING!
THE VOLTAGE USED IN THE DRIVE MIGHT CAUSE
ELECTRICAL SHOCKS. DO NOT TOUCH LIVE PARTS WHILE
THE POWER SUPPLIES ARE ON
WARNING!
TO AVOID ELECTRIC ARCING AND HAZARDS, NEVER
CONNECT / DISCONNECT WIRES FROM THE DRIVE WHILE
THE POWER SUPPLIES ARE ON
WARNING!
THE DRIVE MAY HAVE HOT SURFACES DURING
OPERATION.
WARNING!
DURING DRIVE OPERATION, THE CONTROLLED MOTOR
WILL MOVE. KEEP AWAY FROM ALL MOVING PARTS TO
AVOID INJURY
