Technomate TM-6902HD-T2, Руководство пользователя

Страница: 13 / 41

www.technomate.com
22 23
Your Digital Partner for Life
Te edit and search channels on newly
launched satellites or not preprogrammed
satellites in the list.
1. Press the MENU button to display the main
memu.
2. Use /
and /
buttons to move in the
menu.
3. Select Advence Search, the Advence
Search menu will appear.
4. Select each menu you want to edit/ change.
- Satellite : Select a satellite by pressing / buttons on the remote.
- Transponder : Displays the current Transponder list of the selected satellite.
- Symbol Rate : Displays the current symbol rate list of the selected transponder.
- Polarization : Select Horizontal/ Vertical.
- Search Type : Select All Channel/ FTA Only/ TV Only.
- Network Search : Select Network Search ON/OFF.
5. Scan : Press Red ( ) button on the remote to begin satellite search.
6.
Add TP : Press Green (
) button on the remote to add new transponders by
using numeric buttons 0~9 and / buttons on the remote.
7. Delete TP : Press Yellow ( ) button on the remote to delete transponders.
Advance Search
Through this function, the receiver searches for
all the available channels and saves them in
memory.
- Auto Scan
1. When the Quality is at its highest level, press
the YELLOW( ) button on the remote
control to start scanning for channels.
Terrestrial Scan
- Manual Scan
1. Select the channel number or frequency
that you want to search by using the
UP/DOWN buttons on the remote control,
manually enter a frequency.
2. For Bandwidth, choose either 7 MHz or 8MHz
For Search Type, choose from : All Channel,
FTA Only or TV Only.
3. For
Network Search, select ON to find the
most channels available. The Strength and
Quality of the signal from the selected
channel is shown by the
Level and Quality
indicators at the bottom of the screen.
4. Antenna Supply 5V : Select antenna booster
power ON / OFF.
5. Press the
OK button to start scanning.
Edit the information of the current transponder
PID/Audio PID/PCR PID and search the satellite.
1. Press the MENU button on the remote to
display the main menu.
2. Use /
and
/ buttons on the remote to
move in the menu.
3. Select PID Search, then the PID Search menu
will be displayed.
- Satellite : Select a transponder which you want to
search.
- Transponder : Displays the Transponders of the selected satellite.
- Symbol Rate : Displays the current symbol rate list of the selected transponder.
- Polarization : Select Vertical/ Horizontal.
- Video PID / Audio PID / PCR PID : Select and edit by using numeric buttons 0~9 and /
buttons on the remote.
PID Search