Page
4
of
44
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Version from 04/11/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel: +33 (0) 4 77 22 25 91
Fax: + 33 (0) 4 77 22 38 93
E-mail : [email protected]
1.
Introduction
TECHNOMARK reserves the right to change the information and specifications contained in this manual without prior
notice. You should consult the TECHNOMARK company to learn of any changes that may have been made.
The TECHNOMARK company can in no case be held responsible for any incidental that is related to damages, direct
or indirect, or even exceptional, including but not limited to financial losses related to the use of information
contained in this manual. This clause also applies in cases where TECHNOMARK has been informed and/or has had
prior knowledge of possible risks associated with the use of the equipment.
The TECHNOMARK guarantee of the equipment it manufactures is defined in its terms and conditions. Unless
specifically stated otherwise on our acknowledgement of order receipt, our equipment is guaranteed for 1 (ONE)
year from the equipment's delivery date. This guarantee consists of our free replacement of defective parts, except
with regards to externally supplied sub-assemblies in which case the supplier's warranty is applied. This warranty
does not cover defects resulting from normal wear of the products, from incorrect use, maintenance which is not
performed in accordance with standard trade practices, inadequate storage conditions, an inappropriate product
environment, excessive use of the equipment or failure to follow the instructions for use and/or connection. Under
no circumstances will any repair work covered by the guarantee that causes a loss of time or profit will in no case
result in an extension of the guarantee.
The following are excluded from the cover:
-
Stylus
-
Spring
-
Stylus guide
-
Core
-
The outer part of the cable between the control unit and the marking head or an accessory.
The information contained in this manual is confidential and remains the property of the TECHNOMARK company.
2.
Manuals
The information that is required throughout your machine's lifespan is available in the following manuals:
·
M4 inline Installation Manual
: Contains information on unpacking and installing your equipment.
·
M4 inline Software Manual
: Contains the necessary information for configuring and using your marking
machine.
·
Interfacing instructions for M4 inline
: Contains the necessary information for establishing communication
with your equipment (RS232, Ethernet, 16-way).
·
M4 inline Maintenance Manual
: Contains information about servicing your machine.
3.
Certificates
Your equipment is CE and OC/CB certified. You will find the certificates and associated standards in the following
pages.
