each channel for approximately 3 seconds before skipping to the next channel.
4. Once all your channels are received press “CHANNEL” button (6) once to
confirm the channel.
5. The weather station will receive a new signal automatically every 30 seconds
to update the remote temperature.
6. Press “CHANNEL” button (6) on weather station repeatedly to toggle between
channel 1, channel 2, and channel 3.
7. will be displayed if any of the remote temperature sensor’s battery needs
replacing.
Temperature & humidity memory
1. Press “MAX/MIN” button (2) to display maximum recorded temperature,
minimum recorded temperature, and current temperature. “max” indicates
maximum temperature. “min” indicates minimum temperature.
2. Press “MAX/MIN” button (2) again to display current temperature and humidity.
Celsius / Fahrenheit
1. Press
“▲
°
C &
°
F
”
button (3) to toggle between displaying the temperature in
Celsius and Fahrenheit.
Note:
1. The humidity range is 20% to 95%
2. When the alarm is operating the signal from the sensor will not update the
temperature and humidity readings.
Swivel Ceiling Time Projector and SNOOZE Button:
This clock is equipped with night time projection.
By pressing the “SNOOZE / LIGHT” button (11), the current time will be projected
for about 8-12 seconds. The time can be projected onto a flat surface in a very
dark room. Turn the “TIME PROJECTION FOCUS” knob (8) clockwise or
counterclockwise to adjust focus.
WARNINGS
This main unit is intended to be used only indoors.
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures or humidity.
Avoid exposing the unit to direct sun light.
Do not immerse in water.
Do not remove any screws unless specified.
