EN2
OVERVIEW
A
– Front view
A1: Place mobile device (not included) on top for wireless charging
A2: Alarm 1 ON icon
A3: RADIO/SLEEP button
A4: ALARM 1-2 SET/ON-OFF button
A5: CLOCK SET/MEMORY button
A6: DOWN button
A7: Alarm 2 ON icon
A8: Mood light
A9: SLEEP icon
A10: SNOOZE button
A11: DIMMER button
A12: Wireless charging ON icon
A13: VOLUME SET button
A14: UP button
A15: PM icon
B
– Top view
B1: Charging coil (charging target circle)
C
– Back view
C1: Heat release vent
C2: AC wall outlet
C3: 5V-2500mA AC/DC adapter
C4: Insert DC jack to power up your unit
C5: USB charging cable (not included)
C6: Mobile devices (not applicable for tablet /
iPad)
D
– Bottom view
D1: Backup battery ( 1x CR2032, not included)
Please read these instructions carefully and keep the manual for future reference.
TO POWER UP YOUR CLOCK RADIO
Plug in the AC/DC adaptor to an AC household outlet, and then plug the DC jack to the back of the
unit. The display shows
the default time (at Lo-dim brightness). Press
once to turn the time display to high
brightness if need
.
TO INSTALL BACKUP BATTERY ON YOUR CLOCK RADIO
Your clock radio requires one lithium cell
“CR2032” battery (not included) to provide backup power to
it in the event of a temporary power interruption.
1.
Place your clock radio face down on a flat and soft surface.
2.
Use a coin to turn the battery cover anti-clockwise at the back of your unit.
