WIRELESS 433 MHz TEMPERATURE STATION
Instruction Manual
INTRODUCTION:
Hanging Hole
LCD
Display
Battery cover
Detachable
Stand
Function
keys
Congratulations on purchasing this Temperature Station with wireless 433 MHz
transmission of outdoor temperature and display of indoor temperature. It is further
featuring a DCF-77 radio controlled clock with calendar display and two alarms.
With eight easy to use function keys, this innovative product is ideal for use in the
home or office.
Holder
FEATURES
The Temperature Station
1.
First, insert the batteries into the Temperature Station (see “
How to install
and replace batteries in the Temperature Station
”
below
).
Once the
batteries are in place, all segments of the LCD will light up briefly and a short
signal tone will sound. Then the indoor temperature, the time as 0:00 and the
date as 1.1. will be displayed. If the indoor temperature is not displayed after
a few seconds, remove the batteries and wait for at least 10 seconds before
reinserting them. Once the indoor data is displayed proceed to step 2.
DCF-77 Radio controlled time with manual setting option
24 hour display
Hour and minute display, seconds indicated by flashing dot
Timezone option ±9 hours
Features 2 alarms with snooze function
Weekday with date or date with month calendar display
Indoor temperature reading in °C with minimum and maximum recording
Outdoor temperature reading (for up to 3 transmitters) in °C with minimum
and maximum recording
All minimum and maximum recordings show date and time received and can
be reset
Can take up to three outdoor transmitters
Low battery indicator
Wall mountable or table standing
The Outdoor Temperature Transmitter
Remote
transmission
of outdoor
temperature to
Temperature Station
by 433 MHz signals
Wall
mounting
case
SETTING UP
:
2.
Within 3 minutes of activating the Temperature Station, place the batteries
into the Temperature Transmitter (see “
How to install and replace batteries
in the Temperature Transmitter
”
below
).
3.
After inserting the batteries into the transmitter, the Temperature Station will
start receiving transmissions from the transmitter. The outdoor temperature
should then be displayed on the Temperature Station. If this does not
happen within 15 minutes, the batteries will need to be removed from both
units and reset from step 1.
4.
The Temperature Station can take up to 3 remote transmitters. If you have
purchased additional transmitters, follow step 2 for all extra transmitters.
However, ensure that you leave 10 seconds in between the reception of the
last transmitter and the set-up of the following transmitter. The Temperature
Station will number the transmitters in the order of set-up, i.e. the first
transmitter will have the temperature displayed with the number 1 against it
and so on.
5.
When all the transmitters are set up, there is a testing period, during which
the display switches quickly between all the received transmitters at random,
according to which random transmission it receives. Pressing any key will
stop this process and the display will show the temperature for the first
transmitter. The process also stops automatically if no keys are pressed for a
few minutes.
6.
Once the remote temperature has been received and is displayed on the
Temperature Station, the DCF-77 time code reception is automatically
