Manual draft for WS6501
Note: The moon phase and the weekday will be automatically calculated and displayed for the
date set above.
8. E digit will flash. Press [
▲
] or [
▼
] button to switch 5 languages display of weekday
(English/German/French/Spanish/Italian. See table 1). Press [CLOCK] button to confirm and exit
setting mode.
Table 1
Note: If no key press during setting mode for 10 seconds, it will automatically keep the setting and
exit to normal display.
To set daily alarm
1.
In clock time display mode, press [CLOCK] button thrice to switch to display alarm time.
2.
Press and hold [CLOCK] button for 2 seconds to enter alarm setting mode.
3.
The hour digits will flash, use [
▲
] button to increase by one hour or [
▼
] button to decease by
one hour to your desired hours. Holding down the button will change the increment unit rapidly.
Press [CLOCK] button to confirm.
4.
The minute digits will flash. Use [
▲
] button to increase by one minute or [
▼
] button to
decease by one minute to your desired minutes. Holding down the button will change the
increment unit rapidly. Press [CLOCK] button to confirm and finish the setting.
5.
When alarm is beeping, wave hand in front of the IR sensor to snooze for 5 minutes. Press
[CLOCK], [
▲
], [
▼
] or [CITY] button to stop the alarm for a day.
Page 7 of 15
