Technoline WS1900, Руководство пользователя

Страница: 47 / 227

EN 15
startup, press and hold the [ WI-FI / SENSOR ] key for 6 seconds and let the console back to
normal mode.
1 . In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.
2 . The setting sequence: Time Zone
→
DST ON/OFF
→
Hour
→
Minute
→
12/24 hour format
→
Year
→
Month
→
Day
→
M-D/D-M format
→
Time sync ON/OFF
→
weekday Language.
3 . Press [ ] or [ ] key to change the value. Press and hold the key for quick-adjust.
4 . Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically
exit the setting mode 60 seconds later without pressing any key.
Note:

In normal mode, press [ CLOCK SET ] key to switch between year and date display.

During the setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to normal
mode.
Moon phase
The moon phase is determined by
the time, date and time zone. The
following table explains the moon
phase icons of the Northern and
Southern hemispheres. Please refer
to
orienting the 5-in-1 sensor
towards south section about how to
setup for the Southern hemispheres.
Northern
hemisphere
Moon Phase
Southern
hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Waning Crescent
Pointing the wireless 5-in-1 sensor to south
The outdoor 5-IN-1 sensor is calibrated to point to North for the maximum accuracy. However,
for the user's convenience (e.g. users in the Southern hemisphere), it is possible to use the
sensor with the wind vane pointing to South.
1 . Install the 5-IN-1 wireless sensor with its wind meter end pointing to South. (Please refer to
INSTALLATION OF THE WIRELESS SENSOR for mounting details)
2 . In normal mode of the console, press and hold [ INDEX ] key for 10 seconds to enter into
the calibration mode, then press [ INDEX ]
key again until the “N” icon appears on the left
botton corner of the LCD to enter into the sensor orientation mode
3 . Use
[ Ʌ ]
or [ V ] key to change to lower part (Southern Hemisphere).
4 . Press [ INDEX ] key to confirm and exit.