P. 5
TO READ THE MAXIMUM-MINIMUM TEMPERATURE AND HUMIDITY RECORDS
Press
MAX.MIN
one at a time to view the maximum or the minimum temperature and relative humidity
since the last reset.
When the maximum temperature and humidity are displayed with
, press and hold the
MAX/MIN
will clear the maximums and the unit will start to record and display fresh data again.
When the minimum temperature and humidity are displayed with
, press and hold the
MAX/MIN
will clear the minimums and the unit will start to record and display fresh data again.
TROUBLE SHOOTING
In case your wireless thermometer-clock shows irrelevant information or digits, it maybe affected by
electrostatic discharge or interferences from other devices. Press the
RESET
. Your unit will be reset to
default setting and you need set humidity alarm and mold alert values again.
PLACING OR HANGING UP THE UNIT
Insert the holder to the bottom your unit for desktop display, insert it onto the rear side of your unit for
hanging on the wall.
Since the humidity levels vary greatly according to the location, mount the unit so that it will monitor
the conditions in a location likely to be subject to the most problems.
Precautions
This main unit is intended to be used only indoors.
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
Do not immerse in water.
Avoid contact with any corrosive materials.
Do not dispose this unit in a fire as it may explode.
Do not open the inner back case or tamper with any components of this unit.
Batteries safety warnings
Use only alkaline batteries, not rechargeable batteries.
Install batteries correctly by matching the polarities (+/-).
Always replace a complete set of batteries.
Never mix used and new batteries.
Remove exhausted batteries immediately.
Remove batteries when not in use.
