21
Relative air pressure history bar graph for the past 12 hours
Display of sunrise time, sunset time and sun duration in 150 European cities
Display 8 moon phase icons with indicator throughout the year
LCD contrast setting
Indoor and outdoor low battery indicators
Table standing/wall mounting
Thermo-hygro Transmitter
Remote transmission of outdoor temperature and humidity to weather station by
868MHz
Wall mounting case
Mounting at a sheltered place. Avoid direct rain and sunshine
HOW TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO TRANSMITTER
The outdoor thermo-hygro transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. When the
batteries need to be replaced, the low battery symbol will appear on the LCD. To install and
replace the batteries, please follow the steps below:
1.
Remove the cover.
2.
Insert batteries, observing the correct polarity (see marking).
3.
Replace the battery cover on the unit.
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x C, IEC LR14, 1.5V batteries. To install and replace the batteries, please follow
the steps below:
1.
Remove the cover at the back of the weather station.
2.
Insert batteries, observing the correct polarity (see
marking).
3.
Replace the compartment cover.
Note:
Always wait for 2 minutes after removing the batteries
before reinserting, otherwise start up and transmission
problems may occur. In the event of changing batteries in any
of the units, all units need to be reset by following the setting
up procedures.
