![Technoline WS 9118 Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/technoline/ws-9118/ws-9118_instruction-manual_1070392003.webp)
When the minimum indoor-outdoor temperature and humidity are displayed, press and hold the
MIN will clear the minimums and the unit will start to record and display fresh data again.
TO SYNCHRONIZE YOUR CLOCK WITH MULTIPLE OUTDOOR SENSORS
Your wireless thermometer-clock is equipped with one outdoor sensor. You could
purchase second or third outdoor sensor to work with this thermometer-clock at the same
time.
1. Press + / CHANNEL (ALM On-Off) once, the lowest line of the LCD shows “CH2”
and show “--“. Then press and hold + / CHANNEL / ALM On-Off for 2 seconds.
Then insert 2 x AA batteries into the second outdoor sensor. The temperature of
second outdoor sensor will be displayed on the lower LCD.
2. You could repeat the same step to synchronize third outdoor sensor at “CH3”.
TROUBLE SHOOTING
1. In case your wireless thermometer-clock shows irrelevant information or digits, it
maybe affected by electrostatic discharge or interferences from other devices. Press
the RESET at the back of your unit. Your unit will be reset to default setting
of time and calendar and you need set time and calendar again.
2. In case the outdoor temperature shows “--“ :-
2.1) press + / CHANNEL (ALM On-Off) to view the correct channel i.e. “CH1” is your
default channel
2.2) If Outdoor temperature shows --“ at “CH1”, press and hold + / CHANNEL (ALM ON-
OFF) for 2 seconds. The outdoor temperature should be displayed in around 1
minute.
2.3) if the above do not work, repeat 2.2), then bring in the outdoor sensor and press
RESET on the outdoor sensor.
Remark : if you observe a Low Battery icon on the lower left LCD, which means
your outdoor sensor is at low battery level, replace the batteries of your wireless
transmitter with fresh batteries.
CARE OF YOUR WEATHER SATATION CLOCK
1. Do not expose the unit to extreme temperature, water or direct sunlight
2. Avoid contact with any corrosive materials
3. Do not subject the unit to excessive force, dust or humidity
4. Do not open the inner back case or tamper with any components of this unit
SPECIFICATIONS
Indoor Temp. Range
-10°C to +50°C (+14.2°F to +122°F)
Outdoor Temp. Range
-50°C to + 70°C (-58°F to +158°F)
Out of Range Display
Temperature : HH.H / LL.L